How To Make A Toy For A Hamster Do It Yourself Video

It remains to prepare a treadmill for the hamster. At the final stage, put in each well a deliciously smelling delicacy and close the lids.

On the upper side of the lid, carefully so as not to cut through the knife, scroll through the holes. On ordinary PVA they will not last long.

How To Make A Toy For A Hamster Do It Yourself Video

Write an article Categorize articles Other ideas Gallery Addresses and phone numbers Links Classifieds Users Feedback Our banners Old forum FORUM Site map. We fix the roof and turn over the created structure. If you wish, you can paint the partitions with ordinary gouache in your favorite color. On the second sidewall and the back wall, we plan holes for the valve 4.

This handmade toy will make your hamster move its brains and make some physical effort in order to get to a delicious treat. If the tubes do not enter, make the holes a little larger.

The staircase can be used as a bridge between toys, between two boxes of houses. Switch to English sign up. And yet they invented something new!

This DIY toy for a hamster develops your pet’s mental abilities, trains its body and helps to grind its claws. Cut round holes in cardboard boxes; they should be the same diameter as the pipe. In this case, do not hammer the rope to the eyeballs. Now blanks are cut out from the marked material and glued together.

How To Make A Toy For A Hamster Do It Yourself Video

There is an opening door in the lids of such boxes. We simply remove it, leaving the side of the lid. Using a lighter, the middle of the former wheel melts slightly to such an extent that a curving bridge is obtained. He will roll, gnaw and happily unravel your puzzle, especially since at the end of the path he will be rewarded – a delicious treat!

Read more:  How To Feed A Hamster (Dzungarian And Syrian)

How To Make A Toy For A Hamster Do It Yourself Video

Collect everything you need, that is, a large cardboard box, wrapping paper with a nice ornament, borders from wood or plywood, a ruler, scissors, glue, and, of course, toys and goodies that the rodent will meet along the way. This is quite interesting, and your little friend will be grateful to you!

How To Make A Toy For A Hamster Do It Yourself Video

Put the ladder in the cage. Yes, the maze for the hamster will not be a prison sentence at all, but an interesting game! Write an article Categorize articles Other ideas

Toys for a hamster must be made, otherwise, indeed, he will direct the energy in the wrong direction! Thanks to these cuts, our rungs hold securely between the extreme rings of the wire sidewalls of the wheels.

Using a hole punch, we punch holes along the edge of the n. From it, an animal may begin to have health problems. Tie the remaining free end of the rope to the top of the cage.

It remains to prepare a treadmill for the hamster. Color can be matched to the tone of the grilles. Switch to English sign up. Subsequently, from three rings of different sizes, soldering to them wire-spokes with a length of mm, the side halves of the "squirrel" wheel shown in the figure are formed, and inside each half either small wire rings or washers of a suitable size are soldered to these rings or the washer will insert the axis on which the wheel will rotate.

Thanks to these cuts, our rungs hold securely between the extreme rings of the wire sidewalls of the wheels.